高洋電機が挑戦したい加工
・精度を要する加工(±3μレベル)
・難削材やレアな材質(タングステン・モリブデン・MAT21・金)
・難形状
・魅せる加工
半導体製造装置

MAT21
- サイズΦ90x8mm
- 5000穴xΦ1x8mm
- 半導体装置向け
- ハステロイでも加工可能

純タングステン ネジ加工
Pure Tungsten Screw
- 純タングステン
- 外径ネジM12x30
- 六角穴付き-With hexagonal hole

純ニッケル
Pure Nickel
- 長物(Long thing)200mm
- 外径 Φ4から(Outer diameter from φ4)

純タングステン
Pure Tungsten
- 純タングステン
- M6
- 外形ネジの切削加工 -Outer screw

純モリブデン
Pure Molybdenum
- 小径(Small diameter) Φ6

純タングステン
Pure Tungsten
- M3 外ネジ -Outer screw

MAT21 旋盤加工
Lathing
- 先端径(Tip diameter) φ0.1、φ0.2、φ0.3、φ0.4
- L=20mm
- M4ネジ(Screw)
- φ0.7 穴加工(Hole drilling)

純タングステン
Pure Tungsten
- 純タングステン
- M4内径ネジ切削加工-Inner screw

MAT21 継手
Joint
- 継手形状
- テーパーネジ切削加工
Joint-Cutting taper screw

MAT21
- マシニング加工-Machining

MAT21
- マシニング加工-Machining

MAT21
- マシニング加工-Machining

石英ガラス
- Φ0.5穴加工(ピッチ0.5mm 厚み2mm)

SUS316
・小径深穴加工(Φ0.5×70L)
・計72穴
医療

タングステン薄肉加工
t0.05-Thin wall processing of tungsten
- 左側 紙製 紙の厚さ・・・0.1mm
- 右側 純タングステン製 製品の厚さ・・・0.05mm
- 医療向け X線遮蔽性能を利用したマーカー
- Paper thickness is 0.1mm
- Product thickness is 0.05mm

M0.6ネジ加工
- ハステロイC276でのM0.6ネジ加工
- マイナスドライバー用のすり割り溝0.15mm
- SUS304から更に耐食性の強い金属への要求がありハステロイを提案して製作
- 他にもSUS630での製作実績あり
- 実物は肉眼では点にしか見えません

純モリブデン ボルト
Pure Moribuden Bolt
- M5ボルト 純モリブデン
- Pure Mrbuden M5 Bolt

純銀加工
Sterling silver
- 純銀(Sterling silver) 99.99%Ag
- ローレット加工(Knurling)

タンタル加工
Tantalum
- Φ8から複合加工機で全加工 L20mm
- 長手方向Φ1穴貫通 短手方向Φ2穴貫通
- M5外ネジ加工 M4内ネジ加工
- Dカット加工 溝加工
- Process all from φ8 with a combined lathe processing machine.
- Penetrate φ1 hole in longitudinal direction.
- Penetrate φ2 hole in transverse direction.
- M5 Outer screw. M4 Inner screw.
- D cut and groove processing.

PBパーマロイ
PB Permalloy
- パーマロイリング
- Permalloy Ring

純タングステン
Pure Tungsten
- 無垢材からのパイプ加工
- 肉厚0.2~0.8
- 外径 Φ4~8 全長 10mm
- Processing from round bar.
- Wall thickness 0.2~0.8.
- Outer diameter φ4~8. Full length 10mm.

純タングステン
Pure Tungsten
- M3
- イモネジ形状-Set screw

純タングステン
Pure Tungsten
- Φ2×L3.5mm ピン -Pin

純タングステン
Pure Tungsten
- シャフト(Shaft)
- 全長(Full length) 300mm
- 端面(End face)M5タップ加工

純タングステン
Pure Tungsten
- 肉厚(Wall thickness)0.2
- 外径(Outer diameter)Φ8.5
- 内径(Inner diameter)Φ4
- 全長(Full length)2.5mm

タングステン -Tungsten-
- M5x8(L)、M5x12(L)
- 六角穴付きネジ -Screw with hexagon hole

純タングステン
Pure Tungsten
- 肉厚(Wall thickness)0.4
- 外径(Outer diameter)Φ9
- 内径(Inner diameter)Φ4
- 全長(Full length)2mm

タングステン薄肉加工
Thin wall processing of tungsten
- 純タングステンを紙より薄く加工
- Tungsten processed thinner than paper

純タングステン
Pure Tungsten
- 製品のサイズ・・・Φ4.3×4.2mm
- 製品の厚さ・・・0.05mm
- Product size is Φ4.3×4.2mm
- Product thickness is 0.05mm

PB PC パーマロイ
Permalloy
- 左がPBパーマロイ、右がPCパーマロイ
- Left is PB Permalloy,Right is PC Permalloy.

タンタル
Tantalum
- タンタル複合加工
- Tantalum composite processing
光学

純タングステン
Pure Tungsten
- 内径精度±3ミクロン
- 面粗度Ra0.5
- 量産加工 月産数千個
- 外径Φ12x内径Φ6止まり
- 反対側M3タップ
- 旋削のみで仕上げることにより量産性を確保しました。
Inner diameter accuracy ±3microns. - Surface roughness Ra0.5.
- Mass production processing.
- Thousands produced monthly.
- Outer diameter φ12× Inner diameter φ6. Not through.
- M3 tap on the other side.

プラチナ細穴微細加工
Platinum Microfabrication
- ノズル形状
- 外径0.2mm 内径0.15mm 壁厚0.025mm
- 反対側から1mmの穴で貫通
- Nozzle shape
- Outer diameter 0.2mm, inner diameter 0.15mm, wall thickness 0.025mm
- Penetrating a 1mm hole from the other side

焼結 追加工
Sintering Additional machining
- 球形状 + 目つぶし加工
- Spherical procesing and Turning process to make surface roughness uniform

純ニッケル
Pure Nickel
- Φ7

コバール
Kovar
- M2.6 タップ加工(Tapping)

純タングステン ネジ加工
Pure Tungsten Screw
- M4ネジ加工-Screw
自動車

無酸素銅 C1100
Oxygen-free Copper
- 幅(width)0.8mm
- スリ割り加工(Slit processing)

GOA
- 熱処理後(HRC56-60)、内径、端面、ハードターニング加工
- 面粗度 Ra0.8
- Hard turning of inner diameter and end face after heat treatment.
- Surface roughness Ra0.8
セキュリティ

真鍮加工
Brass
- 真鍮製品-Brass Products-

異形加工
Deformed processing
- Φ36から複合機で全加工
- Process all from φ36 with a combined lathe processing machine.

異形加工
Deformed processing
- 複合加工機にて
- With a combined lathe processing machine.

純銅C1020
Pure Copper C1020
- 純銅(Pure Copper)
- 複合加工(with combined lathe processing machine)
自社製品

純タングステンボルト販売
Pure Tungsten Screw
- 純タングステン製六角穴付きボルト販売
- M3~M8
- Pure Tungsten Screw on Sale
- inch size available
- inspection by gauge

タングステン 印鑑
Tungsten Seal
- タングステンで作成した実印サイズの印鑑(右)
- 重量の比較のため、アルミと純銅でも作成
- Official seal size stamp made with Tungsten
- Made with Aluminum and pure copper for weight comparison
建機

SUJ2
- ベアリング
- Bearing processing

SUS440c
- 熱処理完
- Complete heat treatment
産業機械

コバール
Kovar
- M2.5 ネジ加工(Screw)

SUS304
- 複合加工
- with a combined lathe processing machine.

SUS316
- SUS316
- 複合加工-with a combined lathe processing machine.

アルミ 異形
Aluminum deforming
- 丸棒から複合機にて
- Processing from round bar by combined lathe processing

SUS440c
- 熱処理後内径ハードターニング加工
- 内径Φ5xL30mm 公差レンジ±4μ
- 面粗度 Ra0.6
- Hard turning inner diameter after heat treatment
- Inner diameter φ5×L30mm.
- Tolerance range ±4μ
- Surface roughness Ra0.6

SUS430
- 旋削(Lathe cutting)+マシニング加工(Machining)

SUJ2
- 熱処理後ハードターニング加工
- 外径R面加工
- Hard turning after heat treatment.
- Outer diameter is machined on R surface.

SACM645
- エジソンハード処理(Edison hard processing) HRC65
- 研磨後ラッピング(Lapping after polishing) Rmax0.3S

極細加工 SUS304
Extra fine processing
- 一番左は Φ0.1 L15mm 旋削加工
- The left, φ0.1 L15mm Cutting

微細加工
Microfabrication
- 内径(Inner diameter) φ0.8
- 公差レンジ(Tolerance range) 10μ

純モリブデン
Pure Molybdenum
- テーパー加工
- Teper processing
自転車

SUJ2
- 外径Φ32
- 熱処理後ハードターニング加工
- HRC62
- 角度公差±0.03度
- 真円度5μ
- 外径仕上Rz0.8
- Outer diameter φ32.
- Hard turning after heat treatment.
- HRC62.
- Angle tolerance ±0.03 degrees.
- Roundness 5μ.
- Outer diameter finish is Rz0.8.

鍛造 追加工
Forging Additional machining
- 鍛造品追加工
- 内径公差±5μ
- Additional processing of forged products.
- Inner diameter tolerance ±5μ
その他

ハステロイ 細穴φ0.2加工
Hastelloy φ0.2 hole processing
- ハステロイC276にφ0.2をL20(アスペクト比100)、L30(アスペクト比150)加工。
- 0.1の糸を通してあります。
- Drilled φ0.2 hole in Hastelloy C276 of L20(aspect ratio 100) and L30(aspect ratio 150).
- Through 0.1mm thread.

PBパーマロイ
PB Permalloy
- PBパーマロイ(PB Permalloy)
- 複合加工(Combined processing)

ニオブ加工
Niobium
- φ12から複合加工機で全加工
- 長手方向φ1穴貫通
- M5外ネジ M4内ネジ 加工
- Dカット 溝 加工
- Process all from φ12 with a combined lathe processing machine.
- Penetrate φ1 hole in longitudinal direction.
- M5 Outer screw. M4 Inner screw.
- D cut and groove processing.

42アロイ
42Alloy
- 42アロイ(42Alloy)
- 微細加工(Microfabrication)

SUS303
- 内径(Inside diameter) Φ6xL75mm
- 長穴加工(Long through hole)

純モリブデン
Pure Molybdenum
- ブロック-Block-

純ニッケル
Pure Nickel
- Φ6

SK4
- Φ32から複合加工機にて
- Processing from φ32 with a combined lathe processing machine.

純ニッケル
Pure Nickel
- Φ5

純ニッケル
Pure Nickel
- Φ5

純タングステン
Pure Tungsten
- 箸置き-Chopstick pillow

極小径 穴加工 SUS304
Extremely small hole processing
- 櫛刃型NC旋盤にて加工
- 左からL28mm、18mm、14mm、14mm
- センターにΦ0.2mm穴貫通
- Processing with a comb-type NC lathe.
- L28mm,18mm,14mm,14mm from left.
- Penetration of φ0.2mm hole in the middle.

純タングステン
Pure Tungsten
- φ0.5, L24.5貫通

石英ガラス
- Φ0.5穴加工

セラミックス
- 薄肉加工 厚み0.062

石英ガラス
- Φ0.2穴加工(ピッチ0.4mm 厚み2mm)